Highly pigmented easy cover and easy soak off gel-polishes. Can also be used as blooming gel in nail art in combination with Blooming base gel.
Highly pigmented easy cover and easy soak off gel-polishes. Can also be used as blooming gel in nail art in combination with Blooming base gel.
Highly pigmented easy cover and easy soak off gel-polishes. Can also be used as blooming gel in nail art in combination with Blooming base gel.
Highly pigmented easy cover and easy soak off gel-polishes. Can also be used as blooming gel in nail art in combination with Blooming base gel.
Highly pigmented easy cover and easy soak off gel-polishes. Can also be used as blooming gel in nail art in combination with Blooming base gel.
Carbide drill bit - needle with a small cross-cut. Used to remove your overgrown nail from under the gel or acrylic extensions and electric file manicure. Suitable for refil and correction of gel and acrylic false nails.
This product is great help in nail artists busy rutine. It takes only few seconds to hold the magnet over uncured surface and watch the magic. Cat eye gel-polish can be used over any color you like. Cure in UV for 1min LED 30sec.
Syntetic polygel application brush with spatula and uv protective cap.
Please note: our products are for professional use only.
PolyGel is more flexible than acrylic, stronger than hard gel, and lighter than both. Even being flexible arch still can be pinched. Cures in LED for 1 min and UV lamp for 2min. Does not burn or heat at all!!! It does not run and gives possibilitu to sculpture all 5 nails at the time. Surfase selfleveles. Easy to work with for beginners and experienced nail techs.
Here is step by step instruction:
1. Apply cuticle remover and give it a min to soak, then push the cuticle down using cuticle pusher or orange wooden stick. Make sure you don't leave any skin bits on the nail plate as it may cause gel lifting later.
2. Buff the nail plate to remove shine.
3. Remove the dust using dust brush.
4. Apply Fresher to dehydrate the nail plate. Non of gels would be friendly with moist or grease.
5. Apply Strong/Gentle primer. Now nails are ready for base application.
6. Apply base coat in thin even layer avoiding the skin. Touching the skin also can cause product lifting. Cure in the lamp for 1 min.
7. Using tips, apply Polygel and also cure each nail for 1 min.
8. File false nails to a desired shape and remove dust using dust brush.
9. Apply Youforianails gel-paint or gel-polish colour. Cure in the lamp for 1 min. the list as it is not
10. Apply top coat to seal the colour and cure for 1 min. Remove sticky residue layer if any, using lint free wipes and finishing wipe.
Steps to Polygel application:
1. Scweeze a ball of gel out of the tube and use your spatula to apply it in the tip.
2. Deep your brush into finishing wipe ( you can fill small dispenser or small jar) and tap it on the tissue to get rid of excess of moist. Spread polygel evently in the tip.
3. Start applying pressure from cuticle zone to free edge of the nail (from skin towards the direction of growth). Turn over, smooth the surface underneath using the brush, remove the excess of gel on the sides if necessary. Now cure for 1 min.
P.S. Every time when brush gets sticky, clean it by dipping into finish wipe and tapping on the tissue. When applying gel, don't forget about apex (stress zone). It has to be thick enough to avoid breaking.
I wish you all the best with your work.
Please note: our products are for professional use only.
PolyGel is more flexible than acrylic, stronger than hard gel, and lighter than both. Even being flexible arch still can be pinched. Cures in LED for 1min and UV lamp for 2min. Does not burn or heat at all!!! It does not run and gives possibilitu to sculpture all 5 nails at the time. Surfase selfleveles. Easy to work with for beginners and experienced nail techs.
Here is step by step instruction:
1. Apply cuticle remover and give it a min to soak, then push the cuticle down using cuticle pusher or orange wooden stick. Make sure you don't leave any skin bits on the nail plate as it may cause gel lifting later.
2. Buff the nail plate to remove shine.
3. Remove the dust using dust brush.
4. Apply Fresher to dehydrate the nail plate. Non of gels would be friendly with moist or grease.
5. Apply Strong/Gentle primer. Now nails are ready for base application.
6. Apply base coat in thin even layer avoiding the skin. Touching the skin also can cause product lifting. Cure in the lamp for 1 min.
7. Using tips, apply Polygel and also cure each nail for 1 min.
8. File false nails to a desired shape and remove dust using dust brush.
9. Apply Youforianails gel-paint or gel-polish colour. Cure in the lamp for 1 min. the list as it is not
10. Apply top coat to seal the colour and cure for 1 min. Remove sticky residue layer if any, using lint free wipes and finishing wipe.
Steps to Polygel application:
1. Scweeze a ball of gel out of the tube and use your spatula to apply it in the tip.
2. Deep your brush into finishing wipe ( you can fill small dispenser or small jar) and tap it on the tissue to get rid of excess of moist. Spread polygel evently in the tip.
3. Start applying pressure from cuticle zone to free edge of the nail (from skin towards the direction of growth). Turn over, smooth the surface underneath using the brush, remove the excess of gel on the sides if necessary. Now cure for 1 min.
P.S. Every time when brush gets sticky, clean it by dipping into finish wipe and tapping on the tissue. When applying gel, don't forget about apex (stress zone). It has to be thick enough to avoid breaking.
I wish you all the best with your work.
Please note: our products are for professional use only.
Properties:
Power Consumption: 48W / 24W
Adapter:
Rated Input: 100-240V 50/60 HZ 1A
Rated Input: DC 24V 1.5A rated power
Size: 15 x 19 x 8.5 cm
Wavelength: 365 + 405nm
LED: 30 pcs
Accessories:
1 x UV LED Lamp
1 x AC / DC Adapter
1 x English Manual
By placing your hand into the machine without pressing time setting button, it starts automaticaly with Its maximum working time of 120 seconds.
Heat dissipation hole and fan design can cool the machine continuously for 30 seconds, also protects the machine from overheating.
Very special magic "Gelatty" art (aquarelle effect) gels are on its way to our shop:)
Base coat and 7 main colours ( black, white, red, red-purple, purple, yellow, blue ) which can be mixed to get any of another colours. How to use:
- can be applied over gel/acrylic
- can be applied as a gel polish manicure ( buff the nail, apply Rubber Base- cure, "Gelatty" base (do not cure) and "Gelatty" art gels over. It should be cured all together when you will see the effects which you will like)
- "Gelatty" colours are applied on the special "Gelatty" base. The unique formulation of the colours makes its magic by its own.
Very special magic "Gelatty" art (aquarelle effect) gels are on its way to our shop:)
Base coat and 7 main colours ( black, white, red, red-purple, purple, yellow, blue ) which can be mixed to get any of another colours. How to use:
- can be applied over gel/acrylic
- can be applied as a gel polish manicure ( buff the nail, apply Rubber Base- cure, "Gelatty" base (do not cure) and "Gelatty" art gels over. It should be cured all together when you will see the effects which you will like)
- "Gelatty" colours are applied on the special "Gelatty" base. The unique formulation of the colours makes its magic by its own.